KINETICORE™ — EXCLUSIVE AUSTRALIAN DISTRIBUTOR, QUINTEQ ENERGY BV

We install proven technology.
We deliver a calculable return.

THOR is a flywheel energy storage system that absorbs your site's electrical peaks in real time — no chemistry, no degradation, a 30ms response, and a payback period you can put in front of your CFO.

THOR ROTOR — INDICATIVE, LIVE RESPONSE <30MS
USD 465M global flywheel storage market
26.5% CAGR
0 verified non-Dutch installations in AU market, mid-2026
Patent-protected — sourced exclusively through HBIT
THE PROBLEM

Three mechanisms are quietly compounding your electricity cost

None of them show up as a single alarming line item. All three show up on every invoice, and two of them carry forward for months after the event that caused them.

Demand ratchet
A single short peak sets your billed demand for the rest of the month — in some networks, for up to 12 months forward. One bad afternoon becomes a year-long cost.
TARIFF: $/kVA/MONTH
RATCHET WINDOW: UP TO 12MO
Power factor penalty
Motors and drives that draw reactive power get penalised directly on the bill, independent of how much real work that power did.
PENALTY: REACTIVE kVAr
TRIGGER: LOW COS φ
Harmonic distortion
VFDs and soft starters inject harmonics back into the network. Left unmanaged, it's a compliance exposure as much as a cost one.
STANDARD: AS/NZS 61000
SOURCE: DIODE-RECTIFIER VFDs
PROOF POINT — RHENUS WAALHAVEN, ROTTERDAM

One flywheel, one substation, 65% off the peak

Installed between the substation and the container-lifting cranes creating the peaks. Live since Q2 2024.

600→210
kW peak demand, before → after
65%
peak reduction
<30ms
response time
BEFORE THORAFTER THOR
THE SYSTEM

A spinning mass, not a chemical cell

THOR stores energy mechanically, in a rotating mass under vacuum. It charges and discharges thousands of times without degradation — a different set of trade-offs to batteries, and for this job, the better ones.

<30ms
Response time

Fast enough to absorb a peak before it registers on the network's measurement window.

20+ yrs
Service life

No chemical degradation, no capacity fade, no replacement cycle to budget for.

∞ cycles*
Cycle life

Designed for continuous daily cycling — the exact duty profile that shortens battery life fastest.

Zero
Thermal runaway risk

No lithium chemistry on site. A materially different risk and insurance profile.

Local
Peak absorption

Sits between your substation and the load creating the peak — the peak simply never reaches the meter.

1
Distributor in Australia

QuinteQ's global patents, HBIT's exclusive distribution. Not sourceable through a competitor.

*Rated for continuous duty cycling within design load range — see technical specification for site-specific figures.

WHO THIS IS FOR

If your site has a peak-demand problem, it usually looks like one of these

Ports & terminals
Crane lift cycles and electric terminal trucks creating sharp, repeated demand spikes
Foundries
Induction furnace start-up loads pushing peak demand and harmonics simultaneously
Grain & oilseed processing
Screw press and mill motors starting DOL or star-delta against a tight transformer ratio
General heavy industrial
Any site with ≥120kVA demand tariff and motors in the 55–250kW range starting direct-on-line

Bring us your last twelve months of invoices.

We'll tell you, in writing, whether the ratchet, the power factor penalty, or the harmonics are your actual cost driver — and what a THOR installation would be worth to you. No retainer, no conflict of interest: HBIT is an independent, unconflicted advisor.